Engineered Grading Inspection Report

  • Print

Download this document as a PDF: Engineered Grading Inspection Report

Below is a preview of this document. Please download and print the above referenced PDF file for submission.


ENGINEERED GRADING INSPECTION REPORT

Permit No. _______________________

 

Job Address ______________________________

Owner ___________________________________

 

ROUGH GRADING INSPECTION

SOILS ENGINEER:

All earthen fills were placed upon properly prepared base material, benched where required and compacted in accordance with the approved grading plan, soils report and applicable provisions of the Kern County Grading Code. Based on filed observations and testing, the site has been adequately prepared for its intended use as affected by soils factors.

Tract Grading Completed Yes No N/A

Lot No. Certified _____________________

Soils Engineer _______________________

Signature ___________________________

Reg. No. ____________________________

Date _______________________________

CIVIL ENGINEER:

The rough grading work has been substantially completed in accordance with the approved plans. The site has been graded to approximated rough grade elevations and temporary erosions and edimentation control have been installed.

Civil Engineer _______________________

Signature ___________________________

Lot No. Certified _____________________

Reg. No. ____________________________

Date _______________________________

FINAL GRADING INSPECTION

CIVIL ENGINEER:


The grading work has been satisfactorily completed in accordance with the approved plans and applicable provisions of the Kern County Grading Code. All required drainage improvements, final drainage slopes and permanent erosion control devices have been installed. Adequate provisions have been made for the drainage of surface waters away from the building site(s).

Tract Grading Completed Yes No N/A

Civil Engineer ____________________________

Signature _______________________________

Lot No. Certified _________________________

Reg. No. _______________________________

Date _________________________________

This form must contain both the signature and professional stamp of the Engineer. By stamping and signing this form the Engineer certifies all referenced codes, requirements and standards have been complied with and that this form has not been modified.